Avnan Heads to AHR Expo 2026 in Las Vegas to Launch Advanced Heat Pump Controls
This February, Avnan will be exhibiting at AHR Expo 2026 in Las Vegas—the HVACR industry’s largest and most influential event for OEMs, engineers, and HVAC service professionals.
With thousands of attendees and more than 1,800 exhibitors, AHR Expo is where the industry gathers to explore emerging technologies, share engineering insight, and shape the future of the HVAC industry. For Avnan, AHR 2026 is a major milestone: the company will be launching its new Heat Pump Control & Diagnostic Platform, presenting at the AHR Product Showcase, and demonstrating a range of electronic control solutions live at Booth C545 throughout the show.
The Vegas Opportunity
AHR Expo consistently reflects where HVAC technology is heading, and the 2026 Las Vegas event is expected to place a strong emphasis on:
- Heat pump adoption and electrification
- Advanced electronic controls and system intelligence
- Diagnostics, commissioning efficiency, and serviceability
- Connected, data-driven HVAC platforms
Las Vegas provides a unique setting for large-scale technical demonstrations, high-traffic product theaters, and direct collaboration between OEM engineers, contractors, and service teams. For companies developing next-generation heat pump platforms, AHR is a critical venue for technical discussion.
Avnan’s Heat Pump Control & Diagnostic Platform
At the center of Avnan’s presence at AHR is the launch of its Heat Pump Control & Diagnostic Platform, an advanced electronic control solution designed specifically for modern heat pump systems.
The platform integrates intelligent control logic with embedded diagnostics and mobile-based visibility, enabling OEMs and service teams to better understand how systems are operating in real-world conditions. Rather than treating diagnostics as a bolt-on feature, Avnan’s approach embeds diagnostic intelligence directly into the controller architecture.
The result is a platform that not only controls the heat pump, but also provides insight into system behavior, operating limits, and fault conditions supporting performance, reliability, and service efficiency across the product lifecycle.
Technical Overview
Avnan’s Heat Pump Control & Diagnostic Platform is designed to support a wide range of system architectures and operating environments, including cold-climate applications. Key capabilities include:
- Advanced sensing and telemetry, capturing temperature, pressure, and system state
- OEM-specific diagnostic logic, tailored to compressor type, refrigerant, and control architecture
- Configurable thresholds by SKU and region, enabling multiple product variants without firmware forks
- State-aware fault detection, correlating sensor trends with control logic
- Mobile app access for live diagnostics, fault history, and guided troubleshooting
For OEM engineers, the platform enables faster development cycles, scalable product families, and improved validation. For HVAC service professionals, it reduces guesswork, shortens troubleshooting time, and improves first-visit fix rates.
Value Across the HVAC Lifecycle
Avnan’s platform is designed to deliver value from installation through long-term operation.
Commissioning
Guided startup workflows help validate wiring, sensors, and operating states during installation. Issues are identified early, turning commissioning into a structured verification process rather than trial and error.
Service and Maintenance
Real-time visibility and contextual diagnostics allow technicians to identify root causes faster. Instead of relying on generic fault codes, service teams gain insight into what the system is doing and why—
reducing unnecessary truck rolls and repair time.
Next-Generation Design
Feedback
Field data provides OEMs with insight into how systems perform outside the lab. Repeated fault patterns and operating trends can inform future control logic, component selection, and system margins.
Live Demonstrations at Booth C545
Throughout AHR Expo 2026, Avnan will host live demonstrations at Booth C545, allowing attendees to see the platform in action.
Using a dedicated demo setup that simulates real heat pump operating conditions, Avnan’s team will showcase:
- Live system telemetry and control states
- Diagnostic workflows and fault isolation
- Mobile-based troubleshooting and data visualization
These demonstrations provide a practical look at how advanced controls and diagnostics function in real-world scenarios, bridging the gap between engineering design and field operation.
Sample Electronic Control Products on Display
In addition to the heat pump platform, Avnan will display a selection of sample electronic control products from its HVAC portfolio, including:
- Heat pump controllers (BACnet-enabled)
- Geothermal heat pump main controls
- Fan coil smart controllers
- ERV / HRV control boards
- Custom HVAC and appliance control boards
These samples highlight Avnan’s experience designing OEM-specific electronic controls and supporting products from concept through production.
Product Showcase Presentation – Feb 3 at 5:15 PM, Theatre C
Avnan will also present at the AHR Product Showcase on:
February 3, 2026 at 5:15 PM in Theatre C
During this session, Avnan will present the technical approach behind its Heat Pump Control & Diagnostic Platform, covering:
- Why diagnostics must be designed into control architectures
- How customization supports OEM differentiation without firmware fragmentation
- The impact of diagnostics on commissioning, service, and reliability
Attendees at the presentation will also be entered into a $250 prize draw.
Daily Raffles and Booth Giveaways
Visitors to Booth C545 can participate in:
- Daily raffles and prize draws
- Giveaways and branded swag
- Informal technical discussions with Avnan’s engineering team
Meet Avnan at AHR Expo 2026
AHR Expo 2026 will be a defining event for the HVAC industry, with heat pumps, electronic controls, and diagnostics taking center stage. Avnan looks forward to connecting with OEM engineers, HVAC service professionals, and industry partners in Las Vegas.
- Booth C545
- Product Showcase: Feb 3 at 5:15 PM, Theatre C
- Daily raffles and a $250 prize draw
Avnan welcomes attendees to explore how advanced electronic controls and embedded diagnostics can make heat pump systems smarter, more reliable, and easier to service.
Looking For A Partner?
If you’re looking for a partner to help you build your electronic controls solution, contact us.
Latest Posts
Electrification & Product Complexity: Why Heat Pumps Are Redefining HVAC Engineering
The move toward electrification, which is being driven by the use of heat pumps, regulatory pressure, and goals to reduce…
BACnet as a Core Control Architecture for Modern Heat Pumps
BACnet is no longer a feature decision for HVAC OEM engineers; it is now an architectural assumption. As heat pump…
Building a Better BOM – EMS Strategies to Reduce Costs and Lead Times
The electronics manufacturing landscape is a complex environment, with Original Equipment Manufacturers (OEMs) constantly juggling Bill of Materials (BOM) optimization,…



